Kingston Memory KSM26RD8/16HDI 16GB 2666MHz DDR4 ECC Registered CL19 DIMM 2Rx8 HYNIX (D-DIE) IDT Retail

DESCRIPTION

Kingston's KSM26RD8/16HDI is a 2G x 72-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM) registered w/ parity, 2Rx8, ECC, memory module, based on eighteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

FEATURES

Power Supply: VDD = 1.2V

VDDQ = 1.2V

VPP = 2.5V

VDDSPD = 2.41V to 2.75V

Functionality and operations comply with the DDR4 SDRAM datasheet

16 internal banks

Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available

Data transfer rates: PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600

Bi-Directional Differential Data Strobe

8 bit pre-fetch

Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

Supports ECC error correction and detection

On-Die Termination (ODT)

Temperature sensor with integrated SPD

This product is in compliance with the RoHS directive.

Per DRAM Addressability is supported

Internal Vref DQ level generation is available

Write CRC is supported at all speed grades

CA parity (Command/Address Parity) mode is supported

CL(IDD)
19 cycles
Row Cycle Time (tRCmin)
46.25ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
UL Rating
94 V - 0
Operating Temperature
0^oC to +85^oC
Storage Temperature
-55^oC to +100^oC
Item Dimension (L inchxW inchxH inch)
7 x 3 x 1

Weight
1.00 LB

Warranty Information
Lifetime Warranty